AC-MT Hand-Push Multi-functional Thermoplastic Screeding Road Marking Machine
AC-MT hand-push multi-functional thermoplastic screeding road marking machine not only can be used for normal marking, zebra marking construction, but also can be used as a pre-heater to melt thermoplastic paints. Save construction time, improve construction efficiency.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
Model | AC-MT |
Heating Mode | LPG, infrared or direct-fired burner |
Paint tank capacity | 93 L |
Glass beads bin | 12 L |
Marking equipment | Manual screeding marking shoe, standard configuration 150 mm |
Marking width | 100 mm, 200 mm, 250 mm, 300 mm (optional) |
Marking thickness | 1.8 mm - 3.0 mm (adjustable) |
Dimensions (L*W*H) | 1220 mm × 900 mm × 1100 mm |
Weight | 205 kg |
Optional system | Seat trailer |
Features
1. Perfect equipment for small road marking project.
2. The screeding marking shoe makes the marking perfectly straight and beautiful.
3. The automatic quantitative dispenser which is synchronous with the paint screeding system makes the glass beads dispensing much evener and more economic.
4. The back wheel directional device makes sure the straight walking or curve turning freely.
5. Dual-use machine also can be used as a thermoplastic per-heater to melt materials.
Note: Using 400mm marking shoe, the AC-MT thermoplastic machine could meet the need of pedestrian lines marking construction.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-RB Roll Booster
AC-RB roll booster is a kind of chair following a self-propelled or hand-push road marking machine and other road marking equipment, to realize sitting type machine. Type II, installed with driving device, can supply driving force for the connected machine.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
Main Parameter | AC-RB |
Engine | 6.0 HP air-cooled gasoline engine |
Driving system | Variable speed transmission system |
Chassis | A firm welded frame, surface sprayed with corrosion resistant coating |
Rubber wheel | Ф 440 mm |
Chair | Adjusted to people's body structure |
Connecting device | Universal ball-type joint device |
Dimensions (L*W*H) | 1400 mm × 720 mm × 1080 mm |
Weight | 140 kg |
Features
1. Roll booster is specially designed for self-propelled or hand-push road marking machine, it can reduce intensity of labor, improve working efficiency.
2. This machine adopts firmly welding structure, surface anti-corrosion spray treatment, high-speed bearing ensure machine lightweight and flexible.
3. Air-filled vacuum wheels, diameter is Ф440mm.
4. Driving seat conforming to ergonomic requirements, seat angle and position can be adjusted according to the operator's needs.
5. Driving system of type II roll booster is imported oil pressurized continuously variable speed transmission with automatic brake device.
6. The back wheels are equipped with a differential speed gearing to ensure drive freely around the curve and change directions timely.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-WRC Wind Force Road Cleaner
AC-WRC wind force road cleaner is used to completely clean remaining sandstones and dust before marking road lines, to improve the road marking construction quality & working efficiency. High rotated speed, large wind power can absolutely clean the pavement.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
Model | AC-WRC |
Engine | 6.0 HP air-cooled gasoline engine |
Rotated speed | 2800 rpm/min |
Wind power | 3200Pa |
Air output | 2334 m3/h |
Dimensions (L*W*H) | 1635 mm × 510 mm × 930 mm |
Weight | 120 kg |
Features
1. The construction quality will be greatly declined if the remaining sandstones and dust are not completely cleaned before the road marking construction or other road surface construction.
2. The traditional cleaning methods need more manpower and have disadvantages of poor cleaning effect, high cost and low efficiency of the construction. The successful development of wind-force road cleaner has completely solved the above problems.
3. The gyrate outer shell which is made of aluminum alloy by refined casting has the advantages such as light weight, good pressure resistance and good wind collection.
4. High rotated speed, large wind power can absolutely clean dust, loose gravel, effectually improve marking quality and working efficiency.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-HP Hand-push Pre-marker
AC-HP hand push pre-marker can mark the pre-marking freely according to the requirements of construction and can accomplish 1 - 4 lines independently, greatly improves the construction efficiency. Personalized handle bar design conforming to ergonomic requirements, it's height can be adjusted.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
Model | AC-HP |
Pre-marking equipment | Two working arms equiped with wheels |
Pre-marking quantity | 1 - 4 lines |
Dimension | 1200 mm × 700 mm × 1300 mm (guide rod, water dispenser rod are not included) |
Weight | 100 kg |
Optional system | Roll booster or seat trailer |
Features
1. The cost of the vehicle input is usually expensive if pre-marking by vehicle before the road marking, and the marking work is often affected because of the pre-marker's not timely in place.
2. AC-HP hand-push pre-marker can do pre-marking line freely according to the requirements of construction and can accomplish 1~4 lines independently, which greatly improves the construction efficiency.
3. Alloy chassis, compact structure, high-speed bearing, corrosion-resistant rubber tires ensure operation flexible, better durability.
4. The length of working arm could be freely adjusted according to actual need.
5. Lockable direction wheel ensure machine's moving straight, operation flexible in a curve road.
6. Personalized handle bar design conforming to ergonomic requirements, height can be adjusted according to the operator's needs.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-LU-I/II Loader and Unloader
AC-LU-I/II Loader and Unloader are specially designed to load and unload the road marking equipment, such as self-propelled, hand-push road marking machines and single cylinder preheater, etc. Generally, the weight of these equipment are about 100 kg - 1000 kg. Type I is driven by human, type II is driven by electricity.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
Model | AC-LU-I | AC-LU-II |
Rated lifting capacity | 1100 kg | 650 kg |
Cable length | 7.6 m | 7.6 m |
Gear | 10:5:1 | / |
Rated voltage | / | 12 V (24V) |
Installing mode | Fastened on the front side of the truck with bolts | |
Operating mode | To turn the beam outward and fastenit, then turn the crank manually | To turn the beam outward and then operating the controller (up or down) |
Net weight | 35 kg | 55 kg |
Features
Scientifically designed completely avoied equipment damage and personal safety problem when manual loading and unloading.
CE, GS, EMC certificated in Europe, and UL, CUL certificated in the United States and Canada.
Easy to be installed and have perfect and stable performance, light and small in size.
Only needs one or two workers to finish the frequent heavy loading and unloading work, saving time and human power.
Enquiry Form
[Form Enquiry not found!]