AC-STM-I/II Small Driving-type Thermoplastic Screeding Road Marking Machine
The AC-STM-I/II is a general driving type thermoplastic screeding road marking machine, small and compact, easy operation. It is the optimal equipment for road line marking in medium or large urban road. Type I: pneumatic screeding flat line marking shoe. Type II: pneumatic screeding flat or convex line marking shoe.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Thermoplastic Road Marking Machine
Technical Data
Model | AC-STM-I | AC-STM-II |
Engine | Kohler 25 HP gasoline engine | |
Air compressor | 0.6 m3/min | |
Heating Mode | Liquefied petroleum gas, infrared burner, automatic temperature control | Paint tank capacity | 160 L pressure tank |
Glass beads bin | 55 L | |
Marking equipment | Pneumatic flat line marking shoe. | Pneumatic flat or convex line marking shoe |
Standard configuration 150 mm | ||
Marking width | 100 mm, 200 mm, 250 mm, 300 mm (optional) | |
Marking thickness | 1.8 mm - 3.5 mm (adjustable) | Bottom line 1.0 mm - 2.5 mm (adjustable) convex height 3 mm - 7 mm (adjustable) |
Control system | Digital intelligent control system | |
Dimensions (L*W*H) | 3300 mm × 1450 mm × 2370 mm | |
Weight | 910 kg | |
Optional system | Pre-marking system, and trailer |
Features
1. Engine: Japanese Honda 20HP or American Kohler 18 HP or air-cooled electrical starting single-cylinder gasoline engine. The fuel tank's capacity is 40L.
2. Driving system: imported oil pressurized continuously variable speed transmission system (HTS) with automatic brake device that can freely go ahead, back off and stop. The left and right back wheels are equipped with differential speed gearing to ensure it to drive freely around the curve and change directions timely. Driving speed: 0-22 km/h, maximum climbing capacity: 15°.
3. Heating mode: Propane infrared heating source, saving more than 30% gas compared with the traditional heating way. The heating is more even, more convenient, safer and more environment-friendly.
4. Marking mode: Equipped with hydraulic screeding marking shoe; structure board is made of imported special steel sheet with high-temperature resistance (2000℃) , oxidation resistance and deformation resistance. It has much better stability after stamping. The plinth is the pneumatic screeding structure that is made of special alloy steel. Floor knife that contacts with the ground directly adopts imported hard tungsten steel knife-head. The precision technique ensures its better sensibility, abrasion proof and firmness. The marking has more regular raised shape, evener and straight bottom line edge, and perfect head. The standard configuration of the marking shoe is 150 mm. (Option for other sizes according to the needs of customers).
5. Glass beads spraying system: 55L single pressure type glass beads tanks with visible window. Equipped with single glass beads spraying gun on the left or right, whose pressure , flow rate and spray width can be adjusted to ensure spraying glass beads much firmer, evener and more economical.
6. Electronic control: Set up various standard line type control mode to realize micro-electronic intelligent control; it can be freely adjusted according to the customer's personalized needs.
7. Paint tank: Cool-rolled oxidation-resistant steel paint tank, in whose interlayer the high-tech thermal insulation material is filled. Inside the tank is equipped with the hydraulic chain-driven horizontal vane blender. Paint capacity: 160L.
8. Air compressor: 0.6m3/min piston type air compressor. Air storage tank with adjustable pressure is equipped with automatic safety exhaust device.
9. Warning function: Single warning lamp whose flicker frequency (or burst flash) can be adjusted freely, it improves the safety of marking operation.
10. Guide rod: The extractable hydraulic guide rod can change directions freely to up, down, left or right.
11. Pre-mark system: It can be fitted with pre-marking system. When you marking the one line you can pre-mark another line, this greatly improves the working efficiency.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-BTSC-I/II Big Driving-type Thermoplastic Screeding Road Marking Machine
AC-BTSC-I/II big driving-type thermoplastic screeding road marking machine is a professional road marking machine with high efficiency, and suitable for marking highway, urban road and local road with large construction square. Type I: pneumatic screeding flat line marking shoe. Type II: pneumatic screeding flat or convex line marking shoe.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Thermoplastic Road Marking Machine
Technical Data
Model | AC-BTSC-I | AC-BTSC-II |
Engine | 37 kW diesel engine | |
Air compressor | 0.6 m3/min | |
Heating Mode | Liquefied petroleum gas, infrared burner, automatic temperature control | Paint tank capacity | 325 L pressure tank |
Glass beads bin | 120 L | |
Marking equipment | Pneumatic flat line marking shoe. | Pneumatic flat or convex line marking shoe |
Standard configuration 150 mm | ||
Marking width | 100 mm, 200 mm, 250 mm, 300 mm (optional) | |
Marking thickness | 1.8 mm - 3.5 mm (adjustable) | Bottom line 1.0 mm - 2.5 mm (adjustable) convex height 3 mm - 7 mm (adjustable) |
Control system | Digital intelligent control system | |
Dimensions (L*W*H) | 5950 mm × 2200 mm × 2200 mm | |
Weight | 2960 kg | |
Optional system | Guide warning screen, pre-marking system, and trailer |
Features
The sensitive, precise and stable control system makes the operation easy.
The omnibearing warning system can ensure the safety in construction.
The advanced hydraulic continuously variable transmission can adjust the speed precisely.
The optimal design of drive makes safety driving.
The large capacity paint tank and glass beads bin can make a long distance and continuous marking work.
The infrared heating, automatic temperature control, conducting oil heating preservation and vertical hydraulic stirrer can make an even heating.
Standard equipped with guide warning screen, pre-marking system and trailer is optional.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-BTS Big Driving-type Thermoplastic Spraying Road Marking Machine
AC-BTS Big Driving-type Thermoplastic Spraying Road Marking Machine are low-pressure air spraying thermoplastic road marking machine with high efficiency and flexibility. It can serve long distance and continuous line marking work. The spray thickness is adjustable and not effected by the old marking line.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Thermoplastic Road Marking Machine
Technical Data
Model | AC-BTS |
Engine | 37 kW diesel engine |
Air compressor | 3 m3/min, screw type |
Heating Mode | Liquefied petroleum gas, conducting oil heating, automatic temperature control |
Paint tank capacity | 450 L pressure tank |
Glass beads bin | 120 L |
Marking equipment | Equipped with double air spray guns |
Marking width | 100 mm - 500 mm (adjustable) |
Marking thickness | 1.0 mm - 2.0 mm (adjustable) |
Control system | Digital intelligent control system |
Dimensions (L*W*H) | 5100 mm × 2450 mm × 2300 mm |
Weight | 3800 kg |
Optional system | Guide warning screen, pre-marking system, and trailer |
Features
1.Engine: 37KW water-cooled electrical starting diesel engine with four-cylinder in-line that is environmental protection with low noise. The fuel tank Capacity is 60L.
2.Heating mode:Infrared propane heating, electronic ignition, automatic temperature control and conduction oil heating that can save more than 30% fuel compared with traditional heating mode, and make the heating evener, quicker, more secure and more environmental protection.
3. Driving system: Imported oil pressurized continuously variable speed transmission system (HTS) with an automatic brake device that can freely go ahead, back off and stop. The left and right back wheels are equipped with a differential speed gearing to ensure it to drive freely around the curve and change directions timely. Driving speed: 0-22km/h, maximum climbing capacity: 15°.
4. Marking mode: Equipped with double atomized air-auxiliary spray gun with low pressure. The atomized gas's heating oil recycle pump and heat exchanger in this system is able to improve the spray effect.
5. Glass beads spraying system: Equipped with 120L capacity pressurized glass beads bin with windows that can uninterruptedly spray glass beads. Glass beads sprayer can be equipped on the left or right, whose pressure and flow rate and spray width can be freely adjusted to ensure the spraying glass beads firmer, evener and more economical.
6.PLC electronic control: Multi-functional interface; It can be set with various marking types when out of factory according to the requirements of the users. The line type and its length can be freely adjusted to meet the users needs during construction, realizing the full intelligent control. Continuous line and broken line can be finished together in the same program.
7.Paint tank: Equipped with cold rolled, anti-oxidant, steel conduction oil insulated heating tanks with horizontal hydraulic stirring device inside it. The tank's capacity is 300L. The wall of container can be unloaded when cleaning. The emergency valve at the discharging hole closes automatically when the pressure in the tank falls.
8.Air compressor: 3m3/min screw type compressor; the air source storage tank can adjust the pressure and is installed with a safe automatic exhaust device.
9.Warning system: Equipped with double warning lights, whose flicker frequency (sudden flicker frequency) can be freely adjusted. The electronic warning arrow at the back (the flashing direction is adjustable) of the vehicle can improve the safety of road marking operation.
10.Guide rod: The extractable hydraulic guide rod can change directions freely to up, down, left or right.
11. Pre-marking system: Equipped with pre-marking system. It is able to finish the cleaning work mean while the marking operation and the pre-marking work for another line, which greatly improves the efficiency of the road marking construction.
12. Double seats can be overturned and easy to operate and maintain. The operation device and related system can stretch on both sides to meet different customers operation habits.
Pictures
Enquiry Form
[Form Enquiry not found!]
Catalog
Thermoplastic Road Marking Machine Series
Cold Paint Road Marking Machine Series
Road Marking Pre-heater Series
Auxiliary Equipment Series
Photos
Factory & Workshop >>>
https://www.dyroadmark.com/news/2-uncategorised.html?start=48#sigFreeId4f0994ceb8
Clients Visit >>>
https://www.dyroadmark.com/news/2-uncategorised.html?start=48#sigFreeId56b71866d5
Packaging & Shipping >>>
https://www.dyroadmark.com/news/2-uncategorised.html?start=48#sigFreeId34fa090e03