AC-MTS Middle Driving-type Thermoplastic Spraying Road Marking Machine
AC-MTS Middle Driving-type Thermoplastic Spraying Road Marking Machine are low-pressure air spraying thermoplastic road marking machine with high efficiency and flexibility. It can serve long distance and continuous line marking work. The spray thickness is adjustable and not effected by the old marking line.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
| Model | AC-MTS |
| Engine | 37 kW diesel engine |
| Air compressor | 3 m3/min, screw type |
| Heating Mode | Liquefied petroleum gas, conducting oil heating, automatic temperature control |
| Paint tank capacity | 250 L pressure tank |
| Glass beads bin | 120 L |
| Marking equipment | Equipped with single air spray guns |
| Marking width | 100 mm - 250 mm (adjustable) |
| Marking thickness | 1.0 mm - 2.0 mm (adjustable) |
| Control system | Digital intelligent control system |
| Dimensions (L*W*H) | 4100 mm × 1900 mm × 2100 mm |
| Weight | 2800 kg |
| Optional system | Guide warning screen, pre-marking system, and trailer |
Features
Sensitive, precise and stable micro-electronic control system, can realized diverse operational functions easily.
Advanced hydraulic drive with infinitely variable speed control system, more precise speed control and adjustment.
Drive optimization design can control the machine more efficiently and safe in case of emergency.
Large capacity pressurized paint tank and glass bead bin, keep the continuity of long-distance marking job.
Conduction oil and internal vertical hydraulic agitator ensures efficiently and evenly heating.
Adjustable single pneumatic atomizing spray gun, marking width and thickness can be adjusted flexibly according to individual requirements.
Infrared furnace, save fuels more than 50%, 3 times thermal efficiency than normal furnace.
Sensitive, precise and stable computer control system, easier realizes all operations.
Omnibearing warning system, more safe during construction.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-MTSC-I/II Middle Driving-type Thermoplastic Screeding Road Marking Machine
AC-MTSC-I/II middle driving-type thermoplastic screeding road marking machine is suitable for marking highway, urban road and local road with large construction square. Type I: pneumatic screeding flat line marking shoe. Type II: pneumatic screeding flat or convex line marking shoe.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
| Model | AC-MTSC-I | AC-MTSC-II |
| Engine | 35 kW diesel engine | |
| Air compressor | 0.6 m3/min | |
| Heating Mode | Liquefied petroleum gas, infrared burner, automatic temperature control | Paint tank capacity | 250 L pressure tank |
| Glass beads bin | 120 L | |
| Marking equipment | Pneumatic flat line marking shoe. | Pneumatic flat or convex line marking shoe |
| Standard configuration 150 mm | ||
| Marking width | 100 mm, 200 mm, 250 mm, 300 mm (optional) | |
| Marking thickness | 1.8 mm - 3.5 mm (adjustable) | Bottom line 1.0 mm - 2.5 mm (adjustable) convex height 3 mm - 7 mm (adjustable) |
| Control system | Digital intelligent control system | |
| Dimensions (L*W*H) | 4100 mm × 1900 mm × 2100 mm | |
| Weight | 2260 kg | |
| Optional system | Guide warning screen, pre-marking system, and trailer | |
Features
1. Advanced hydraulic drive with infinitely variable speed control system, control and adjust speed more accurately.
2. Drive optimization design can control the machine more efficiently and safe in case of emergency.
3. Larger capacity pressurized paint tank and glass bead bin, keep the continuity of long-distance marking job.
4. Conduction oil and internal vertical hydraulic agitator ensures efficiently and evenly heating.
5. Screeding structure makes the markings more straight and beautiful.
6. Infrared furnace, save fuels more than 50%, 3 times thermal efficiency than normal furnace.
7. Sensitive, precise and stable computer control system, easier realizes all operations.
8. All directions warning system, ensures more safe during construction.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-TT-I/II Truck-trailer
AC-TT-I/II truck trailer is a trailer transportation vehicle which is equipped with pneumatic (or hydraulic) brakes, locking height adjustments device on the junction with the main drive vehicle, make the transportation of medium and large road marking machines more convenient during construction.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
| Model | AC-TT-I | AC-TT-II | ||||
| 3600 | 5400 | 8100 | 8100 | 18000 | 22500 | |
| Load capacity | 3600 kg | 5400 kg | 8100 kg | 8100 kg | 18000 kg | 22500 kg |
| Width | 2100 mm | 2100 mm | 2100 mm | 2438 mm | 2438 mm | 2591 mm |
| Deck length | 4800 mm | 4800 mm | 6000 mm | 7200 mm | 7200 mm | 8400 mm |
| Load height | 510 mm | 550 mm | 597 mm | 838 mm | 813 mm | 813 mm |
| Axle | 2 | 2 | 3 | 2 | 2 | 3 |
| Hitch adjustable range | 432-546 mm | 470-584 mm | 445-629 mm | / | / | / |
| Tilted deck angle | / | / | / | 12° | 12° | 12° |
Features
Type I is equipped with movable loading and unloading ramp at the rear. The main purpose is to make it convenient for the transportation of the big or middle size marking machine during the construction.
Type II is equipped with carriage automatic lifting devices to deal with the loading, unloading and transportation difficulties of these machines, which greatly improves the efficiency.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-STC Small Driving type Two-Component Paint Road Marking Machine
AC-STC road marking machine is a small driving type two-component road marking machine, used for highway and urban area road line marking. This kind of thick road line coating, has good abrasion resistance and long service life.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Two Component Road Marking Machine
Technical Data
| Model | AC-STC |
| Engine | Kohler 18HP or Honda 20HP gasoline engine |
| Air compressor | 0.6m3/min |
| Paint tank capacity | 170 L ×2 |
| Glass beads bin | 52 L |
| Paint pump | Equipped with double high-pressure airless plunger pump; Maximum pressure:25MPa; Single pump flow:12.5L/min |
| Spraying gun | Double pneumatic spray guns, one manual spray gun |
| Control system | Digital intelligent control system |
| Applied paint | Cold-solvent paint and water-based paint |
| Spraying width | 50-500mm(adjustable) |
| Dimensions (L*W*H) | 2900mm×1600mm×2400mm |
| Weight | 682kg |
| Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type |
Features
AC-STC road marking machine is a small driving type two-component road marking machine, used for highway and urban area road line marking. This two component paint road marking machine has good applicability for the cold spray paint, which can be applied to high viscosity and high solid content and mixed quartz sand or glass bead or other aggregate paint. This kind of thick road line coating, has good abrasion resistance and long service life.
1. Imported oil pressurized continuously variable speed transmission with automatic brake device. The back wheels are equipped with a differential speed gearing to ensure it to drive freely around the curve and change directions timely.
2. The welded making shoe is made of special steel sheet that is impact-resistant and anti-oxidation.
3. Paint tank is made of stainless steel or cold-rolled anti-oxidation materials.
4. Pressurized glass beads bin with windows is observable and the pressure, flow rate and spray width of glass beads spraying guns can be freely adjusted to ensure the spraying glass beads firmer, evener and more economical.
5. Equipped highlight warning light marks the night marking operation more convenient. The warning lights can freely adjust its flicker frequency, greatly improving the marking operations' safety.
6. The core control unit of this system is a PLC (programmable logic controller) which brings the micro-electronic intelligent control into effect to make its performance more stable and structure more compacted.
7. A firm welded, four-wheel chassis structure, the hydraulic steering can freely control directions, and the stable brake system makes the driving much safer.
8. The extractable guide rod can change directions freely to up, down, left or right.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-MSTC Middle Driving type Two-Component Paint Road Marking Machine
AC-MSTC middle driving type two-component paint road marking machine is used for highway and urban area road line marking, having swing structure type, screeding flat-line type and high-pressure airless spraying type.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Two Component Road Marking Machine
Technical Data
| Model | AC-MSTC |
| Engine | 26 kW water-cooled three-cylinder gasoline engine |
| Air compressor | 0.6 m3/min |
| Paint tank capacity | 700L |
| Hardener tank capacity | 100 L |
| Glass beads bin | 100 L |
| Paint pump | Double high-pressure airless pumps; Maximum pressure: 20 MPa; Single pump flow: 20 L/min |
| Spray gun | Four pneumatic spraying guns, single manual spraying gun, especially for airport lines |
| Marking width | 100 mm - 1000 mm (adjustable) |
| Control system | Digital intelligent control system |
| Dimensions (L*W*H) | 5300 mm × 2200 mm × 2300 mm |
| Weight | 2800 kg |
| Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type |
Features
Advanced hydraulic drive CVT system , adjust and control speed accurately.
Driving optimal design can control the machine effectively and ensure safety in an emergency.
High capacity double room paint tank and glass beads tank can ensure long distance and continuous road marking.
New type high pressure airless piston pump , stable pressure and high flow can ensure high efficiency and high quality road marking.
The width of road marking line can be adjustable according to customer's request.
Automatic paint stirring system can ensure stir equably, and improve the performance of paint effectively, and improve the durability of road marking line.
Long wheel tread can ensure road marking line more straight, and reduce the effect of human factors, and improve the quality of road marking line obviously.
Sensitive, precise and stable microelectronic control system can be operated easily.
Double seats which can be chosen freely according to the driver's request.
All-around warning system ensure safety during construction.
Optional system include pre-marking, trailer, swing type, screeding type.
Enquiry Form
[Form Enquiry not found!]
AC-BSTC Big Driving type Two-Component Paint Road Marking Machine
AC-BSTC big driving type two-component paint road marking machine is used for highway and urban area road line marking, having swing structure type, screeding flat-line type and high-pressure airless spraying type.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Two Component Road Marking Machine
Technical Data
| Model | AC-BSTC |
| Engine | 37 kW water-cooled four-cylinder diesel engine |
| Air compressor | 0.6 m3/min |
| Paint tank capacity | 700L |
| Hardener tank capacity | 100 L |
| Glass beads bin | 100 L |
| Paint pump | Double high-pressure airless pumps; Maximum pressure: 20 MPa; Single pump flow: 20 L/min |
| Spray gun | Four pneumatic spraying guns, single manual spraying gun, especially for airport lines |
| Marking width | 100 mm - 1000 mm (adjustable) |
| Control system | Digital intelligent control system |
| Dimensions (L*W*H) | 5300 mm × 2200 mm × 2300 mm |
| Weight | 2800 kg |
| Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type |
Features
Advanced hydraulic drive CVT system, adjust and control speed accurately.
Driving optimal design can control the machine effectively and ensure safety in an emergency.
High capacity double room paint tank and glass beads tank can ensure long distance and continuous road marking.
New type high pressure airless piston pump, stable pressure and high flow can ensure high efficiency and high quality road marking.
The width of road marking line can be adjustable according to customer's request.
Automatic paint stirring system can ensure stir equably, and improve the performance of paint effectively, and improve the durability of road marking line.
Long wheel tread can ensure road marking line more straight, and reduce the effect of human factors, and improve the quality of road marking line obviously.
Sensitive, precise and stable microelectronic control system can be operated easily.
Double seats which can be chosen freely according to the driver's request.
All-around warning system ensure safety during construction.
Optional system include pre-marking, trailer, swing type, screeding type.
Pictures
Enquiry Form
[Form Enquiry not found!]