AC-BR cold paint road line removal machine
AC-BR cold paint road line removal machine is specialized for removing cold solvent marking lines and hard waste. With the excellent performance, especially used for clean old road surface, waste oil, mud, and semi-loose sand, without destroying the road surface.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
| Model | AC-BR |
| Engine | Kohler or Briggs 6.0 HP gasoline engine |
| Removal grinding head | 12 bundles of close steel brush |
| Removal depth control | Rotary depth adjustment, throttle speed control system |
| Removal width | 100 mm - 450 mm |
| Dimensions (L*W*H) | 900 mm × 550 mm × 1150 mm |
| Weight | 110 kg |
Features
1. Handle rotating removal strength control type, the rotate speed of elimination grinding is controlled by throttle.
2. Removal grinding head is 12 bundles of close steel brush.
3. High strength welded frame.
4. Special rubber wheel with abrasion resistance, which equipped with imported high-speed bearing.
5. Excellent performance in cleaning old road surface, waste oil, mud, and semi-loose sand, with no road surfaces destroyed.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-RMR thermoplastic road line removal machine
AC-RMR thermoplastic road line removal machine is specialized for clearing away the broken, stained and wrong marking lines. Imported tungalloy cutter is hard and high speed rotating, with long service life, and easy to assemble.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Technical Data
| Model | AC-RMR |
| Engine | Kohler or Briggs 10.5 HP gasoline engine |
| Removal grinding head | Tungalloy cutter, 48teeth for removing thermoplastic old lines |
| Removal depth control | Accurate pitch depth adjuster |
| Removal pressure control | Dial instruction pressure adjuster |
| Clutch protective device | Automatic clutch equipment |
| Dust collector joint | Φ 76 mm |
| Operation method | Pull, push, wave |
| Removal width | 180 mm - 620 mm |
| Dimensions (L*W*H) | 1240 mm × 780 mm × 1100 mm |
| Weight | 230 kg |
| Optional system | Dust collector and roll booster |
Features
1. Imported tungalloy cutter is hard and high speed rotating, with long service life, and easy to assemble.
2. Fixed with depth adjuster equipment, can accurately adjust and fix depth according to the needs.
3. According to the conditions of road surface and different kinds of paint, the removal pressure can be adjusted.
4. Automatic clutch makes the cutter automatic clutch with removal shaft according to the engine speed and the conditions of road surface, which makes sure the high quality removal, fewer damages and extends service life.
5. Equipped with emergency stop switch, which can stop the machine in short time.
6. Convenient foot control parking system makes the machine in safety condition in any time.
7. Forward, back off, left or right operated freely.
8. A firm welded frame, whose surface has been chrome-plated or high temperature treatment; the four-wheel structure makes the whole machine work more stable, and operation more convenient.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-SSTC-I/II Self-propelled Two-component Paint Road Marking Machine
AC-SSTC-I/II self-propelled two-component paint road marking machine is mainly used for small scale road marking and zebra marking, with good proformance and long service life. The screeding type can make the marking line straight and beautiful. The glass beads system make the galss beads uniform and saved.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Two Component Road Marking Machine
Technical Data
| Model | AC-SSTC-I | AC-SSTC-II |
| Engine | Kohler or Robin 6.0 HP gasoline engine | |
| Driving system | Original imported oil pressurized variable speed transmission system | |
| Paint tank capacity | 44 L | 40 L |
| Glass beads bin | 12 L | 14 L |
| Hardener tank capacity | 16 L | 11 L |
| Marking shoe | Manually structural type, standard configuration 150 mm, 200 mm,450mm | |
| Marking width | 100 mm, 200 mm, 250 mm, 300 mm, 450 mm (optional) | |
| Dimensions (L*W*H) | 1300 mm × 950 mm × 1250 mm | 1450 mm × 1300 mm × 1300 mm |
| Weight | 162 kg (450 mm marking shoe) | 240 kg (150 mm marking shoe) |
Features
The devices of alloy chassis, high-speed bearing and corrosion-resistant rubber tyres with compact structure ensure the operation more flexible and durable.
Advanced hydraulically powered variable speed transmission control system adjusts and controls speed accurately, and realizes self-walking function.
The welded marking shoe made of wear resistant special steel owns the best stability, and ensures the marking line more regular and line thickness evener.
Its automatic stirring system can ensure the two components be mixed sufficiently, improving performance of paint greatly and prolonging lifetime of marking line.
The width of marking line can be adjusted to other sizes according to customers' specific requirement.
The automatic quantitative glass beads dispenser that is synchronous with the paint structural system ensures the dispensing evener，more exact economical.
The directional device that can lock rear wheel ensures the marking machine walk along straight lines and turn freely on curved roads.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-HAL-V/VI Hand-push Cold Paint Airless Road Marking Machine
AC-HAL-V/VI hand-push cold paint airlese road marking machine mainly used for small-scale road line marking work such as zebra marking, lines in parking lots and athletic fields, special characters and arrow indications. Type V: without glass beads system. Type VI: spraying type glass beads system.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Cold Paint Road Marking Machine
Technical Data
| Model | AC-HAL-V | AC-HAL-VI |
| Engine | Kohler or Robin 6.0 HP gasoline engine | |
| Applied paint | Cold solvent paint | Cold solvent, water-based paint |
| Glass beads bin | Without | Spraying type |
| Paint pump | Diaphragm type; Maximum pressure: 20 MPa; Flow: 4.5 L/min | |
| Spray gun | Double manual spraying guns | |
| Marking width | 50 mm - 450 mm (adjustable) | |
| Dimensions (L*W*H) | 1445 mm × 1100 mm × 890 mm | 1445 mm × 1140 mm × 910 mm |
| Weight | 130 kg | 150 kg |
| Optional system | Roll booster, warning light and lighting lamp | |
Features
Equipped with alloy chassis, high-speed bearing and inflatable tyre, compact in structure which ensures flexible and convenient operation.
New high-pressure airless diaphragm pump with big flow and stable pressure ensures efficient and high-quality road line marking work.
Lockable wheel steering device ensures the marking machine work in straight line or change direction on curving road freely.
Marking width can be adjusted according to user's demand and the user can add a roll booster to make the machine be self-propelled.
The user can also ask for stainless steel spray system to use water-borne paint or microelectronics control system for automatic control.
Optional equipments: roll booster, warning light and light.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-HAL-I Hand-push Cold Paint Airless Road Marking Machine
AC-HAL hand-push cold paint airless road marking machine mainly used for small-scale road line marking work such as zebra marking, lines in parking lots and athletic fields, special characters and arrow indications.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Cold Paint Road Marking Machine
Technical Data
| Model | AC-HAL-I |
| Engine | Robin 6.0HP Gasoline engine |
| Marking Method | high pressure airless spraying type |
| Paint pump | auto-shuttle plunger pump;Flow rate: 9.0L/min; |
| applied paint | Cold-solvent paint and water-based paint |
| Spraying width | 50-450mm (adjustable); |
| Spray Gun | Double manual spray guns |
| Glass beads system | without, 6L gravity dispensing type, 10L pressure spraying type (optional) |
| Dimension(L*W*H) | 1750×1000×1250mm |
| Weight | 160 KG |
| Optional system | Roll booster, warning light and lighting lamp |
Features
1. Equipped with alloy chassis, high-speed bearing and inflatable tyre, compact in structure which ensures flexible and convenient operation.
2. New high-pressure airless diaphragm pump with big flow and stable pressure ensures efficient and high-quality road line marking work.
3. Lockable wheel steering device ensures the marking machine work in straight line or change direction on curving road freely.
4. Marking width can be adjusted according to user's demand and the user can add a roll booster to make the machine be self-propelled.
5. The user can also ask for stainless steel spray system to use water-borne paint or microelectronics control system for automatic control.
6. Optional equipments: roll booster, warning light and light.
Enquiry Form
[Form Enquiry not found!]
AC-TMAL-I/II Truck Mounted Cold Paint Airless Road Marking Machine
AC-TMAL-I/II Truck Mounted Cold Paint Airless Road Marking Machine is used for long distance marking. The machine should be installed in the corresponding position of the truck with the related spraying equipment, such as spraying gun bracket, guide rod and encoder.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Cold Paint Road Marking Machine
Technical Data
| Model | AC-TMAL-I | AC-TMAL-II | ||
| A | B | A | B | |
| Engine | Kohler or Honda 13 HP gasoline engine | |||
| Air compressor | 0.6 m3/min | |||
| Applied paint | Cold solvent paint, water-based paint | Cold solvent, water-based, two-component paint | ||
| Paint tank capacity | 110 L | |||
| Glass beads bin | Without | 110 L, spraying | Without | 110 L, spraying |
| Paint pump | Double pump | Single pump | Single pump | Double pump |
| Maximum pressure: 25 MPa. Single pump flow: 20 L/min | ||||
| Spray gun | Double pneumatic spraying guns, single manual spraying gun | |||
| Marking width | 50 mm - 500 mm (adjustable) | |||
| Control system | Digital intelligent control system | |||
| Dimensions (L*W*H) | 1130 × 1290 × 1410 (mm) | 1110 × 1260 × 1410 (mm) | 1130 × 1290 × 1410 (mm) | |
| Weight | 380 kg | 455 kg | 650 kg | 735 kg |
| Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type and two-component type | |||
Features
1. Please mount the host and other related components on the corresponding positions on the truck prior to use. Road Marking equipment can be removed when it is not required, which doesn't affect the normal use of the vehicle.
2. Automatic hydraulic stirring system ensures uniform components of paint, furthermore improves paint performance and extends service life of paint coating.
3. Faster traveling speed does not require the additional transport. It is suitable to mark lines on roads, expressways and city streets.
4. New high-pressure airless plunger pump with big flow and stable pressure ensures efficient and high-quality road line marking work.
5. Marking width can be adjusted freely according to construction situation. All the spray guns can be controlled separately.
6. Sensitive, precise and stable computer control system helps achieve all the functions.
7. The user can choose to equip cleaning system to make sure that hose and spray guns are cleaned timely, or pre-marking system to pre-mark lines before or besides marking lines.
8. For type II 18HP engine can be equipped so that four pneumatic air spray guns can work at the same time to mark extra-wide lines at the airport.
Pictures
Enquiry Form
[Form Enquiry not found!]