AC-SSAL-I/II Small Driving type Cold Paint Airless Road Marking Machine
AC-SSAL-I/II middle driving-type cold paint airless road marking machine. The width of road marking line can be adjustable according to customer's request. Type I for cold solvent and water-based paint . Type II for cold solvent , water-based, two-component, two color paint.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Cold Paint Road Marking Machine
Technical Data
Model | AC-SSAL-I | AC-SSAL-II |
Engine | Kohler 18 HP or Honda 20 HP gasoline engine | |
Air compressor | 0.6 m3/min | |
Applied paint | Cold solvent paint, water-based paint | Cold solvent, water-based, two-component, two color paint |
Paint tank capacity | 170 L | 170 L × 2 |
Glass beads bin | 52 L | |
Paint pump | Single high-pressure airless plunger pumps Maximum pressure: 25 MPa Single pump flow: 20 L/min | Double high-pressure airless plunger pumps Maximum pressure: 25 MPa Single pump flow: 12.5 L/min |
Spray gun | Double pneumatic spraying guns, single manual spraying gun | |
Marking width | 50 mm - 1000 mm (adjustable) | |
Control system | Digital intelligent control system | |
Dimensions (L*W*H) | 2900 mm × 1600 mm × 2400 mm | |
Weight | 682 kg | |
Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type and two-component type |
Features
1. Advanced hydraulic drive CVT system, adjust and control speed accurately.
2. Driving optimal design can control the machine effectively and ensure safety in an emergency.
3. High capacity double room paint tank and glass beads tank can ensure long distance and continuous road marking.
4. New type high pressure airless piston pump, stable pressure and high flow can ensure high efficiency and high quality road marking.
5. The width of road marking line can be adjustable according to customer's request.
6. Automatic paint stirring system can ensure stir equably, and improve the performance of paint effectively, and improve the durability of road marking line.
7. Long wheel tread can ensure road marking line more straight, and reduce the effect of human factors, and improve the quality of road marking line obviously.
8. Sensitive, precise and stable microelectronic control system can be operated easily.
9. All-around warning system ensure safety during construction.
10. Optional system include pre-marking, trailer, swing type, screeding type, and two component type.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-MSAL-I/II Middle Driving-type Cold Paint Airless Road Marking Machine
AC-MSAL-I/II middle driving-type cold paint airless road marking machine equiped with new type high pressure airless plunger pump. Stable pressure and high flow can ensure high efficiency and high quality road marking. Type I for cold solvent and water-based paint. Type II for cold solvent, water-based, two-component, two color paint.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Cold Paint Road Marking Machine
Technical Data
Model | AC-MSAL-I | AC-MSAL-II |
Engine | 26 kW water-cooled three-cylinder gasoline engine | |
Air compressor | 0.6 m3/min | |
Applied paint | Cold solvent paint, water-based paint | Cold solvent, water-based, two-component, two color paint |
Paint tank capacity | 260 L | 130 L × 2 |
Glass beads bin | 55 L | |
Paint pump | Single high-pressure airless plunger pumps Maximum pressure: 20 MPa Single pump flow: 20 L/min | Double high-pressure airless plunger pumps Maximum pressure: 20 MPa Single pump flow: 12.5 L/min |
Spray gun | Double pneumatic spraying guns, single manual spraying gun | |
Marking width | 50 mm - 1000 mm (adjustable) | |
Control system | Digital intelligent control system | |
Dimensions (L*W*H) | 3700 mm × 1840 mm × 2450 mm | |
Weight | 782 kg | |
Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type and two-component type |
Features
1. Advanced hydraulic drive CVT system, adjust and control speed accurately.
2. Driving optimal design can control the machine effectively and ensure safety in an emergency.
3. High capacity double room paint tank and glass beads tank can ensure long distance and continuous road marking.
4. New type high pressure airless piston pump, stable pressure and high flow can ensure high efficiency and high quality road marking.
5. The width of road marking line can be adjustable according to customer's request.
6. Automatic paint stirring system can ensure stir equably, and improve the performance of paint effectively, and improve the durability of road marking line.
7. Long wheel tread can ensure road marking line more straight, and reduce the effect of human factors, and improve the quality of road marking line obviously.
8. Sensitive, precise and stable microelectronic control system can be operated easily.
9. Double seats which can be chosen freely according to the driver's request.
10. All-around warning system ensure safety during construction.
11. Optional system include pre-marking, trailer, swing type, screeding type,and two component type.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-BSAL-I/II Big Driving-type Cold Paint Airless Road Marking Machine
AC-BSAL Big-size Driving Type Airless Road Marking Machine is a kind of driving type airless cold and also tow-component road marking machine. Large capacity paint tank and glass beads bin make it suit for long distance and continuous marking work.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Cold Paint Road Marking Machine
Technical Data
Model | AC-BSAL-I | AC-BSAL-II |
Engine | 37 kW water-cooled four-cylinder diesel engine | |
Air compressor | 0.6 m3/min | |
Applied paint | Cold-solvent paint, water-based paint and two-component paint (optional) | |
Paint tank capacity | 325 L × 2 | |
Glass beads bin | 175 L | |
Paint pump | Double high-pressure airless pumps; Maximum pressure: 20 MPa; Single pump flow: 20 L/min | |
Spray gun | Double pneumatic spraying guns, single manual spraying gun, automatic gun rack | Four pneumatic spraying guns, single manual spraying gun, automatic gun rack, especially for airport lines |
Marking width | 100 mm - 1000 mm (adjustable) | |
Control system | Digital intelligent control system | |
Dimensions (L*W*H) | 5300 mm × 2200 mm × 2300 mm | |
Weight | 2800 kg | |
Optional system | Guide warning screen, pre-marking system, trailer, swing type, screeding type and two-component type |
Features
1. Advanced hydraulic drive CVT system, adjust and control speed accurately.
2. Driving optimal design can control the machine effectively and ensure safety in an emergency.
3. High capacity double room paint tank and glass beads tank can ensure long distance and continuous road marking.
4. New type high pressure airless piston pump, stable pressure and high flow can ensure high efficiency and high quality road marking.
5. The width of road marking line can be adjustable according to customer's request.
6. Automatic paint stirring system can ensure stir equably, and improve the performance of paint effectively, and improve the durability of road marking line.
7. Long wheel tread can ensure road marking line more straight, and reduce the effect of human factors, and improve the quality of road marking line obviously.
8. Sensitive, precise and stable microelectronic control system can be operated easily.
9. Double seats which can be chosen freely according to the driver's request.
10. All-around warning system ensure safety during construction.
11. Optional system include pre-marking, trailer, swing type, screeding type,and two component type.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-THDP-I/II/III Trailer Type Hydraulic Double Cylinder Thermoplastic Paint Pre-heater
AC-THDP-I/II/III trailer type thermoplastic paint pre-heater is equipped with AC-VHDP thermoplastic paint pre-heater and the hauling platform, is a special marking facility with both melting and haulage functions. Its haulage platform is mainly used for transporting the driving-type and self-propelled thermoplastic road marking machine.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Road Marking PreheaterTechnical Data
Model | AC-THDP-I | AC-THDP-II | AC-THDP-III |
Engine | 18HP air-cooled sigle-cylinder diesel engine | ||
Stirring system | Hydraulic stirring system with protective device | ||
Heating Mode | LPG, energy-efficient burner | LPG, infrared propane burner | Diesel injection burner |
Paint tank capacity | 225 L × 2 (custom design) | ||
Dimensions (L*W*H) | 6300 mm × 1700 mm × 2400 mm | ||
Weight | 2700 kg | ||
Optional system | Automatic temperature control system, heat-transfer oil heating system, electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices |
Features
1. Equipped with pneumatic (or hydraulic) brake equipment, warning lamp (flicker frequency adjustable), and low temperature burning device ensure sufficient burning.
2. No need to install the pre-heater on the truck, save vehicle and manpower, reduce construction cost, improve working efficiency and safety in the construction site.
3. Trailer type pre-heater is an special equipment for melting paint and transportation, suitable for the driving-type and self-propelled thermoplastic road marking machine.
4. Optional system include automatic temperature control system, heat-transfer oil heating system, electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-FHDP Four-wheel Type Hydraulic Double Cylinder Thermoplastic Paint Pre-heater
AC-FHDP thermoplastic paint pre-heater is a special equipment for melting thermoplastic paint and transportation, suitable for self-propelled thermoplastic road marking machine, can save vehicles and manpower, reduce construction cost, improve working efficiency and safety in the construction site.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Road Marking PreheaterTechnical Data
Model | AC-FHDP-I |
Engine | 18HP air-cooled sigle-cylinder diesel engine |
Stirring system | Hydraulic stirring system with protective device |
Heating Mode | LPG, energy-efficient burner |
Paint tank capacity | 225 L × 2 (custom design) |
Dimensions (L*W*H) | 4500 mm × 1700 mm × 2300 mm |
Weight | 2300 kg |
Optional system | Automatic temperature control system, heat-transfer oil heating system, electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices |
Features
1. Equipped with pneumatic (or hydraulic) brake equipment, warning lamp (flicker frequency adjustable), and low temperature burning device ensure sufficient burning.
2. No need to install the pre-heater on the truck, save vehicle and manpower, reduce construction cost, improve working efficiency and safety in the construction site.
3. Trailer type pre-heater is an special equipment for melting paint and transportation, suitable for self-propelled thermoplastic road marking machine.
4. Optional system include automatic temperature control system, heat-transfer oil heating system, electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices.
Pictures
Enquiry Form
[Form Enquiry not found!]
AC-VHSP-I/II/III Hydraulic Single Cylinder Thermoplastic Paint Pre-heater
AC-VHSP-I/II/III hydraulic single cylinder thermoplastic paint pre-heater is compared with AC-VHDP-I/II/III hydraulic double cylinder thermoplastic paint pre-heater, except the paint tank and control valve (single), other parameters are basically same as AC-VHDP-I/II/III.
EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088
Category: ACE Road Marking Machine > Road Marking Equipment > Thermoplastic Paint PreheaterTechnical Data
Model | AC-VHSP-I | AC-VHSP-II | AC-VHSP-III |
Engine | 18HP air-cooled sigle-cylinder diesel engine | ||
Stirring system | Hydraulic stirring system with protective device | ||
Heating Mode | LPG, energy-efficient burner | LPG, infrared propane burner | Diesel injection burner |
Paint tank capacity | 300 L (custom design) | ||
Dimensions (L*W*H) | 2070 mm × 1010 mm × 1860 mm | ||
Weight | 930 kg | ||
Optional system | Automatic temperature control system, heat-transfer oil heating system, electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices |
Features
1. It is specialized machinery used for thermoplastic road marking construction which is made by patent technology.
2. One of thermoplastic road marking construction machinery.
3. Multichannel integration hydraulic transmission, infinitely variable speed and powerful torsion, which can ensure high performance and heavy load running, clockwise and anti-clockwise stirring.
4. LPG infrared propane heating and diesel injection heating ensure high efficiency burning, save time and energy.
5. High efficiency melting paint, long time continuous working, easy operation and maintance.
6. Optional system include automatic temperature control system, heat-transfer oil heating system, electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices.
Pictures
Enquiry Form
[Form Enquiry not found!]